Teksti on käännetty käyttämällä Google Translate online,siksi saa esintyä virheitä.Käännöksen alkuperäinen kieli on englanti,katsomaksi alkuperäistä vaihtaa kieli tässä.
Alkuperäisen kielen valinta
Three potential customer complaints regarding 2011 WK/WD heated seats are covered below: 1) On 2011 WK vehicles built prior to 7/20/10 ... If a customer complaint is for a lack of heating performance experienced with the vehicle's heated seats, follow service procedure for a flash update of the Heated Seat Module (CSWM) to the most recently released change level. 2) On 2011 WK vehicles built after 7/19/10, equipped with base leather (sales code: *UL) heated seats ... If a customer complaint is for driver/passenger heated seat turning off too quickly, after only a few minutes of operation, replace the heat element in the front seat back with P/N 68138265AB. Note that one or both of the following diagnostic codes may also register for this condition and should be cleared; B1E99-1E (driver seat) and B1E9A-1E (passenger seat). 3) On 2011 WK/WD vehicles built before 6/13/11, equipped with rear heated seats … If a customer complaint is for a rear heated seat turning off too quickly, after only a few minutes of operation, replace the heat element in the rear seat back with one of the following part numbers, as follows: WK - All seat trim sales code -Use P/N 04610226AE WD - CL seat trim sales code - Use P/N 04610226AE WD - AL seat trim sales code - Use P/N 68058436AE WD - TL seat trim sales code - Use P/N 68058615AE Note that one or both of the following diagnostic codes may also register for this condition and should be cleared; B1E9B-1E and B1E9C-1E. ______________________________________ Contact Us at CAGRIS@Chrysler.com for feedback related ONLY to this GPOP Tech Tip. DO NOT email regarding repair procedures unrelated to this Tech Tip or part order inquires. Please include the Part Number (s) and Tech Tip Part Description of the Tech Tip you are referencing for our tracking system.
