Teksti on käännetty käyttämällä Google Translate online,siksi saa esintyä virheitä.Käännöksen alkuperäinen kieli on englanti,katsomaksi alkuperäistä vaihtaa kieli tässä.
Alkuperäisen kielen valinta
When using these seat adjusters on 2004 and early Model 2005 vehicles (build date before 9/13/04) you will need to reuse the wiring harness from the seat adjuster being replaced. The early model 2005 can also be identified by having a gray recliner motor connector. In the event the wiring harness has been damaged and can't be reused order wiring harness 05143456AA for Driver Side or 05189154AA for Passenger Side. These wiring harness will have extra connectors if you do not have a fully loaded seat. You may also run across vehicles with non-memory seat option (i.e. no memory button on the door controls) but with memory seat adjusters this can be identified by two connectors on each motor. The non-memory seat adjusters will work but you will have extra three pin connectors for each motor. If you have a seat w/ memory but w/o heat or w/o memory but w/ heat use the seat adjuster w/ memory and w/ heat. ______________________________________ Contact Us at CAGRIS@Chrysler.com for feedback related ONLY to this GPOP Tech Tip. DO NOT email regarding repair procedures unrelated to this Tech Tip or part order inquires. Please include the Part Number (s) and Tech Tip Part Description of the Tech Tip you are referencing for our tracking system.